Leitz Focomat IIc lens receptacle disassembly

While working on the Focomat IIc, I needed to remove the lens receptacle. Here are a few photos showing the important parts. Except of course the part where the bearings fell out and rolled everywhere.

Figure 1: Remove end pieces

Figure 1: Remove end pieces

Figure 2: Remove 8 hex screws (2.5mm)

Figure 2: Remove 8 hex screws (2.5mm)

Figure 3: Remove rails (careful! Bearings will fall out)

Figure 3: Remove rails (careful! Bearings will fall out)